70_boosted
7/5/2007 4:05:48 PM
ok so i have my 400...its for a pontiac sorry its not a chevy lol...anyways...my block is .030 over...forged pistons, rods, crank, etc...what i am looking at is what would be my best choice for cam and int/exh valve size...im gonna slap a 6-71 charger on there and yea...what cam should i go with and what should i do to my heads...port and polish is gonna be a done deal...help will be appreciated
z28pete
7/7/2007 7:56:27 PM
You need to give more info, such as compression, blower pressure, exhaust system, what kind of engine you are looking for, all out race engine or a streetable engine. When you have all of that figured out , call a few of the cam companies & see what they can do for you.
74454bb
7/7/2007 8:24:24 PM
Try PAW call them with your specs and they will tell you what cam you will need...what compression do you plan on running...keep it low.
70_boosted
7/7/2007 8:43:27 PM
i can get a set of either 7.6...or an 8.1...yea sorry i didnt put more info to get a real good idea...but i found a place that said a 282/292 would be best suited for turbo/supercharging
