Newbie, building a 68 Camaro for my bro-in-law in Iraq - Page 5

Those brakes look great!  You do a good job of powder coating...  Looks really good...
 
BTW, I anm not sure if I mentioned this but I am active duty Coast Guard down here in Savannah, GA.  I think that what you are doing is really cool.  The LT is a lucky man...

FlightMech, thanks for the kind words and thanks for your service as well!

Been a rough few weeks here. We found out what caused the ear infection in my son. If anyone has heard of RSV my son had a bad case of it. He had a high fever, and a horrible respiratory infection. Basically every moment I had where I wasn't at work was spent with him lying beside me so I could see if he stopped breathing or turned blue. Yesterday he was pretty much through with it, but guess who has a cold now....yep, me! This weekend will be a work weekend, though. TV crew from Cruise Control is coming to film us, so we'll get a lot done.

We also got our first donation from Iraq! A guy in one of the local clubs heard we needed a fuel cell so he sent us a new Summit 16gal cell with fuel sender and mounting kit!

Hey Camarrow girl, cute name and thanks for the pics. Do you have a Webcam...?

More goodies! Ron Davis Racing Products hooked us up with an LS1 swap radiator with fans and shroud and all the goodies!

Nice.  That looks sharp...

What's the haps?  Any updates?

I'll get some updates up soon. After my son finally got better I got really sick. Sinusitus really bad, couldn't even walk my head was so fubared. Then my computer died. Just got my new one up. It's been a month so far!

Dang.  Sounds like you got issues.  Hope you are feeling better! Now that you got your computer running, let's hope your welder holds up!!!  hahaha... err...sorry...

love to get me one of those rad and fans

Now I am back and running, literally! Just got word that Shawn's group got fast-tracked and he is coming home on April 20th! AWESOME news for all of us, but I am in a total rush now, especially after losing a month to being sick! I am going to try my hardest to get this thing done, but I am not sure if I can do it. Worst case Shawn and I finish the car together, which would be something very cool as well. With our budget and all, it is going to be a squeeze. If anyone wants to come help out on any weekend, or if anyone has any parts or anything they can help us out with, please let me know! If you offered parts and I haven't gotten back to you, I will get with you soon. I need all the help I can get in any way you can help us!

So here are some photos of my day in the shop!

Mocked up the Wilwood clutch master cylinder. I'm going to relocate the fuse panel down and out a little bit and modify the clutch linkage to work with this MC, but this should work out perfectly.


Upper a-arms powdercoated semigloss black with Prothane bushings installed. Thanks to HRT Performance for fighting the old bushings out and sticking the new ones in! Didn't even scratch the powdercoat! That's why they are the only machine shop I trust!


IROC steering box donated by a guy in Carolina F-body Club. All painted up and clearcoated in gunmetal.


Got the hinges mounted on the doors:


Worked on setting up the rear frame and suspension. Gotta basically start from scratch. I need help with this if anyone local wants to come and do it for me!


And finally, the sweet remote trunk release that Modo Innovations donated to the project!


Tomorrow night I'm going to do some more work and try and get some more photos.

Man. I hope you get it done!  I wish you the best of luck!
 
 

OK, got some updates! Got the gauges mocked up in there. The white circle in the middle I was going to use for another gauge, but I decided to use that spot for a few LEDs for turn signals and the like. I'm gonna mount the nitrous pressure gauge right into the dash somewhere. I have an idea, but not set yet. I have since painted the bezel semigloss black, so we'll see what I decide once I get the gauges in and in the car.



Also had some rust and some spots that I wanted to remove to smooth out the firewall. We cut out a small section of the firewall and I'm going to weld in a piece of metal there and smooth it over. I'm going to relocate the wiring bulkhead to under the fender to keep the clutter to a minimum in the engine bay.

Temporary tacked thin metal.


And I had good help, too. My good friend Russ dropped by and had some fun with the angle grinder.


My best friend also dropped by and sandblasted some parts for me, so last night I powdercoated them in semigloss black. These parts were ROUGH, so they came out pretty good for what I had to start with!

I get multiple requests for what parts I still need every week, so here it is for those of you who might be interested!

Monetary donations always welcomed!
Trunk lid
Rear spoiler
Front spoiler
rear view mirrors
Bumpers
RS headlight parts
Hidden wiper motor
Entire windshield wiper setup
Rear interior panels
All the little trim pieces from the dash
LS1 MAF sensor
LS1 shorty headers
LS1 T56 bellhousing
LS1 T56 4th gear/input shaft
LS1 T56 6th gear
LS1 front plate
LS1 front and rear plates
Stereo system
2nd gen TA or Z28 rear axle, posi preferred!
New windshield and rear glass

And probably a ton of other stuff I'm forgetting. I'll update the post as I remember stuff. Feel free to PM me, post up, or send me an email to webmaster@patriotdream.org

Thanks!

A guy on the Z28.com board donated the entire stereo system, so mark that off!

Wow... Nice job... We're rooting for you!  YOU CAN DO IT!!!!

Got the gauge bezel all put together with the Autometer Ultra-lite II gauges and three LEDs donated by TheLEDLight.com. They are in a Covan's panel donated by Queen City Speed.



Also got in the Classic update complete wiring harness donated by American Auto Wire!


I'm going to have a BIG update this weekend, so stay tuned! I also REALLY need any help we can get. We're running out of time and money fast with a lot left to do. 

Sorry for the delay in updates! Been a crazy few weeks! Here are soom shots of the progress:
31Bravo donated a brand new set of rearview mirrors from Rick's!

Also got the rear frame laid out, squared, and ready to be installed this week. Check out all my plumb lines and tape on the floor.

Also had a MAF donated! I blasted it, cleaned it up, powdercoated it, and installed some stainless hardware on it.

Also had a spare throttle body lying around so I took it apart and powdercoated it, along with the bracket and spring. I need the sensors for it if anyone has one lying around!

And also got in my modified spindles, hubs, and caliper brackets from Ed Miller! Ed left them bare for me, so I blasted and powdercoated the spindles and brackets.




Tomorrow night look for some LS1 front brake pictures!

And we have brakes! Got Ed Miller's LS1 front brake setup on the car and it is SWEET! The rotors are drilled/slotted donated by RotorsOnline. I didn't put the pads and all in yet because I had to order the hardware kit from CarQuest. But here it is!




 And the steering linkages installed, with the exception of a pitman arm, which I still need one off of a power box for a 1st gen.

And the front wheel installed!

Well those mirrors look pretty good I hope you get the bracket for the rear view mirror soon it's still on back order. The brakes look great behind those wheels and the blue powercoating looks awsome!
 
just out of curiosity what kinda power are you looking to make n/a and with the spray?

Man that looks good... Keep the upd8s coming!!!

We're looking for about 400 on motor and about 500 on spray.

The rear frame is finally squared up and installed! As soon as I get the new spring pads in the mail I'm going to have this car rolling!

I NEED MORE INFO OVER HERE!!! I AM GOING CRAZY BECAUSE I WANT TO KNOW HOW IT'S GOING!!!!!
 
AAARRGGHH!!!!!!!
 
 C'mon man... I don't have much hair left to pull out anymore!!!!

Awesome work man. Love all the pics. I think that this is such a cool project.

hey birdman let me know how the carpet kit works out because i was looking at getting one from rick's also

I got the car down and on four wheels the other day! Unfortunately, then is started raining and we had to push it back in before we could get pics. We then jacked the car up and started working on getting the mockup engine and trans in the car. Speed Hound has been working with us on some retrofit brackets, so we wanted to mock everything up to see what needed to be done before we put the new drivetrain in.





And more powdercoated parts by Triangle Musclecar. :)