best place for parts ???

Printable Version

Camaro Forum >> Camaro Models >> 3rd Generation >> best place for parts ???

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

best place for parts ??? - 9/23/2008 12:27:38 PM    IROCz   Posts: 8 Joined: 9/9/2008 Status: offline     Hi all I am nearly finished getting my IROCz Camaro done just need headlining a rear light and a few other bits to finish of?? age84 kindly suggested Classic Industries. just when the parts cost       $ 473.29 and the shipping to the UK is          $869.55 its a bit expensive on shipping,  just wondered if any one can suggest another company to try picture from recent road trip to Belgium .. Italy next year < Message edited by IROCz -- 9/23/2008 3:01:54 PM > Post #: 1

RE: best place for parts ??? - 9/23/2008 3:27:23 PM    age84 Posts: 231 Joined: 1/10/2008 From: Nampa, ID Status: offline So is that what they wanted to charge for shipping for a headliner now that sucks. well i got my headliner from http://www.hawksthirdgen.com and it was no were near what that headliner cost with shipping. i did check hawks first but they had no international shipping listed on the headliners. but i do know that mine was shipped from the factory not from hawks you could always give them a call a see if they could help you.   _____________________________ Treasure Valley F-Bodys, SW Idaho Camaro and Firebird Club (in reply to IROCz) Post #: 2

RE: parts ??? Project :-) - 9/23/2008 4:41:36 PM    IROCz   Posts: 8 Joined: 9/9/2008 Status: offline Thanks for looking age 84... I may have to go with it although I will talk to the main supplier of American car parts in the UK, OCW tomorrow see what they can do.. He said he would try a bit harder than before, I hope .... As he would get better deals, as shipping all the time. any way thought id post some pictures of the project, the climate over in the UK is not best suited to American car''s and the pervious owner didn’t keep it undercover. Witch was a shame, but I learnt a lot from the project. (in reply to IROCz) Post #: 3

RE: parts ??? Project :-) - 9/23/2008 8:16:16 PM    age84 Posts: 231 Joined: 1/10/2008 From: Nampa, ID Status: offline Your car looks real good what have you done so far and what are your plans for it in the future _____________________________ Treasure Valley F-Bodys, SW Idaho Camaro and Firebird Club (in reply to IROCz) Post #: 4

RE: parts ??? Project :-) - 9/24/2008 2:36:46 AM    IROCz   Posts: 8 Joined: 9/9/2008 Status: offline Just the body work and solving the random cut out and service engine soon light from flashing, was the fuel regulator in the end, .. It is only a 5.0 TPI , but I am looking at a recon engine to be fitted its from GM and a company in the UK fit of cause it’s the 5.7 J , or just looking at giving it a bit more power, and finishing of the inside. , but the problem I have is sourcing parts, service items and smaller parts are easy its just the big stuff L.. And err .. driving it, I am planning on taken it around Europe holidays and getting away from the UK weather. Yes its raining at the moment L (in reply to age84) Post #: 5

RE: parts ??? Project :-) - 9/24/2008 9:16:48 PM    350rs Posts: 2111 Joined: 4/23/2006 From: St. Louis, Missouri Status: offline car looks really good. sorry i didnt get to post before but im having LOADS of problems signing on to the site. ive found a lot of harder to find parts in a year one catalog. yearone.com is pretty good for at least finding the name and size of a lot of the parts you need, but are a bit high priced. but you can use the knowledge gained from that to your advantage and find what you need cheaper somewhere else. _____________________________ March 2008 Ride of the Month 89 RS, 60 over 350 crate, 5 speed. (in reply to IROCz) Post #: 6

305 Rebuild ?? or 350 - 9/27/2008 4:22:48 PM    IROCz   Posts: 8 Joined: 9/9/2008 Status: offline Thanks for the advice i will look at the yearone catalog, hope you don''t mind me asking what you would suggest ? I have an option to get my 305 engine rebuilt with custom heads or recommendations received. or 350 fitted. ?? what would you recommend, i have read on the site that the 305 engine is harder for performance but the rebuild is cheaper.. or is it 350 all the way . Thanks (in reply to IROCz) Post #: 7

RE: 305 Rebuild ?? or 350 - 9/27/2008 11:36:30 PM    350rs Posts: 2111 Joined: 4/23/2006 From: St. Louis, Missouri Status: offline as far as the engine, it all depends what your looking for. what do YOU want out of the motor? _____________________________ March 2008 Ride of the Month 89 RS, 60 over 350 crate, 5 speed. (in reply to IROCz) Post #: 8

RE: 305 Rebuild ?? or 350 - 9/28/2008 12:43:17 PM    IROCz   Posts: 8 Joined: 9/9/2008 Status: offline Well it would be nice to have a bit more acceleration, but the main reason is i think the, valve stem oil seals are gone + it just needs a bit of TLC as a little smoke when you first start. and a very slight oil smell. (in reply to 350rs) Post #: 9

RE: 305 Rebuild ?? or 350 - 9/28/2008 5:25:08 PM    Jr. Mechanic Posts: 401 Joined: 9/1/2007 Status: offline Well remember it is an american muscle car, not a european econo, haha.  Looks real good.  Depending on what is available to you over there, a 350 is the best way to go.  You can swap in a 350 and really the only things you would need would be the engine and injectors from a 350, other than that everything would swap right over. _____________________________ Jr''''''''''''''''s Rides: 1983 Camaro Z28, 1993 Jeep Grand Cherokee, 1997 Plymouth Neon (in reply to IROCz) Post #: 10

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Camaro Prices

Chevy Camaro
Camaro concept car
1969 Camaro

Top 10 Posters
z28pete 5699 spectergt260 4598 madmikez28 4276 95slvrz28 3317 02stangt 3171 74454bb 2749 cplthomas 2713 bluovlh8er 2494 spartan66 2459 blade 2345

New Vendors
Borla Performance industries
AMSOIL - Performance Oil Technology