Camaro Forums   Camaro Classifieds   Photo Gallery   Members   Search   Forum FAQ   Contact CF   Sponsors
    Camaro News   Camaro Timeslips   Camaro Recalls   TSBs   Register   Login  

i need help

  Printable Version
Camaro Forum >> Camaro Models >> 3rd Generation >> V6 Tech >> i need help Page: [1]
Login
Message << Older Topic   Newer Topic >>
i need help - 5/19/2007 8:22:15 AM   
harvick boy

 

Posts: 10
Score: 0
Joined: 11/14/2006
Status: offline
i just put the motor and trans back in my '89. the motor has a jumpy idle. it will rev constantly up to 2500 and back down to 1100. there is one plastic vacuum line from the intake that broke and i dont know where it goes. could that be the problem. any help will be appreciated.
Post #: 1
RE: i need help - 5/19/2007 10:25:37 AM   
MadMikeZ28


Posts: 4156
Score: 0
Joined: 7/15/2006
Status: offline
If that vacuum line is not plugged yes it could be a problem. The small plastic tube should be the source for the blend air doors, a valve for the heater (if its no yours), cruise control (if you have it) and the vacumm resivour under the front of the left fender near the head lights

_____________________________

Its better to burn out than fade away

"Is everyone on DOPE?"

Golden teeth and golden tones, welcome to my presence



(in reply to harvick boy)
Post #: 2
RE: i need help - 5/19/2007 12:57:08 PM   
harvick boy

 

Posts: 10
Score: 0
Joined: 11/14/2006
Status: offline
so i could just plug the line and would be ok?

(in reply to MadMikeZ28)
Post #: 3
RE: i need help - 5/19/2007 2:26:30 PM   
350rs


Posts: 2016
Score: 0
Joined: 4/23/2006
From: St. Louis, Missouri
Status: online
350rs's photo gallery
is that what that little bubble thing is behing the lights??? ive looked at that a few times while workin on my car and wondered...

_____________________________

March 2008 Ride of the Month



89 RS, 60 over 350 crate, 5 speed.

(in reply to harvick boy)
Post #: 4
RE: i need help - 5/19/2007 3:47:23 PM   
MadMikeZ28


Posts: 4156
Score: 0
Joined: 7/15/2006
Status: offline
If you plug it then there will be no vacuum to the blend air doors and you will only get air from the defrost.

350RS
Yeah thats the vacuum resivour about near the marker light inside the left fender.

_____________________________

Its better to burn out than fade away

"Is everyone on DOPE?"

Golden teeth and golden tones, welcome to my presence



(in reply to 350rs)
Post #: 5
Login OR Register now to post a reply to this forum topic.
Page:   [1]


 
Camaro >> Camaro Models >> 3rd Generation >> V6 Tech
Jump to:


Featured Sponsors
Advertising Info

Top 10 Posters
z28pete5570
spectergt2604173
madmikez284156
95slvrz283155
02stangt2988
74454bb2749
cplthomas2546
bluovlh8er2467
blade2300
spartan662250

New Vendors
Borla Performance industries
AMSOIL - Performance Oil Technology
MagnaFlow Performance Exhaust

Camaro Forums .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.